How to use SP flash tool to flash Stock Rom firmware

0
24

Those are the instructions to flash Stock ROM on any (MediaTek) MTK android device using Smart flash tool (SP flash tool) on Computer.Here we have given a step by step tutorial to flash stock ROM firmware using SP Flash tool

Remember: Your Android device Battery Should be Charged more then 50% to perform the Full flashing process.

WARNING: If you don’t follow the instructions given here carefully, your device might get corrupted.

Step 1: Firstly, Download and Install (MediaTek) MTK USB Drivers on your Computer.If you don’t have any driver installed.

Step 2: To get started, download SP flash tool compressed file and extract it on your computer.

Step 3: Next, download stock ROM firmware file of your Android device and extract it to a folder on your computer. You will find the Android scatter file after extracting.

Step 4: Now switch off your Android smartphone or tablet and remove the battery from the device (if it is removable).

Step 5: Next, go to the extracted folder and click “Flash_tool.exe” to launch SP flash tool.

 

Step 6: Next, in the download tab click on “scatter-loading” button.

Step 7: Now click on “Open Scatter File” and choose the scatter file.

Step 8: click on the “Download” button to launch the firmware flashing process.

Step 9: Now connect your Android device to the computer using the original USB data cable while pressing Volume down button.

Step 10: The firmware flashing process will start immediately, and it will take a minute or two to get completed. Once the flashing process is finished, you will see the “Download OK” green ring in Smart Phone Flash Tool.

Step 11: Now close the SP Flash tool Window and unplug your Android smartphone or tablet from the computer

Congrats you have successfully installed firmware your Android Smartphone through Smart flash tool (SP flash tool.Android Need to wait a few minutes the phone is switched for a few moments.

LEAVE A REPLY

Please enter your comment!
Please enter your name here